How to build a custom 3Dprinted RC Lamborghini Aventador LP-700-4?
This is how we did it. With our LEGACY Chassis v.7.2
AVENTADOR!!! Which car fan would not be familiar with this Italian Super Sport Car. We choose this vibrant yellow to embody the companies main colors.
Our aim was to get as much authenticity as possible. As always we let you be the judge to tell how well we could create him.
Building Video Enjoy!
VIDEO
Download body kit STL files archived with WinRAR
Chassis v.7.2 (L.Aventador LP-700-4)
This is a Legacy Chassis! Click to v.7.3
Chassis dimensions
Wheelbase 270mm Front Wheel Track 193mm Rear Wheel Track 198mm
We strive for the best Chassis, because I am a perfectionist. My bro isn’t, so there’s the tension growing! This is a second generation chassis which means it has 3D printed frame not the U-profile aluminium 1st generation.
Parts List of Chassis v7.2 (2nd generation )
Screws and nuts: M4x40 1 piece + M4 nut M4x25 2 piece
M3 ball joint 8 pieces M3x30 2 pieces + 2x M3 nuts M3x50 2 pieces + 2x M3 nuts M3x25 2 pieces + 2x M3 nuts M3x40 2 pieces + 2x M3 nuts M3x10 2 pieces M3x20 2 pieces M2x12 39 pieces M2x16 8 pieces M2x20 11 pieces M2x8 4 pieces
Download CHASSIS STL files archived with WinRAR
The whole design is made for scale 1:10 This is our seventh model’s self-developed Chassis. It’s quite, sturdy now as it can be jumped with.
Threaded rods: M4 2 pieces 47mm long M3 2 pieces 15mm long M3 2 pieces 11mm long
Magnets: D8x4 2 piecesNails: D2x38 4 pieces
Bearings: 4x10x4 4 pieces 5x11x5 6 pieces 10x15x4 2 pieces
3D printing settings we used
3D Printer: Zortrax M200 plus Technology: LPD Used material: ABS filamen Slicer program: Zortrax Z-SUITE
Settings: Infill: 20% Recomended layer height: 0.19 mm Support was set automatically by the program
Got a question about building Know-How? Ask us at the bottom of this page!
Gearbox
Non-printed parts and general INFO of 3Dprinted Lamborghini Aventador LP-700-4
Suspension
hole to hole distance: 55 mm
Rocking arm screw
2mm nail 35-40mm long. Threaded (DIY), used as a screw. Note: Spring washer used!
Wheels
Fastrax scale 1:10 Tyre diameter is: 65 mm Product number: FAST0078GMGet it on ebay
Ball cups for steering
4 mm ball with 3mm screw thread.
Wheel adapter
Tamiya: 53056
Rear Drive Shaft
Tamiya: 51216 TA05 A front drive shaft must be shortened
Flange lock nut
Tamiya: 53024
Differential
HSP 94103
Bewel gear inlet
this is the inlet gear to the differential
TG10 Wheel Axle 2 pcs
Tamiya: 50823
Motor 540
7.2 – 12 V , 20.000 rpm
10x15x4 bearing
2 pcs for the differential
4x10x4 bearing
Front wheel bearing
Chassis assembly Video
Here’s a full assembly video of a very similar chassis. Enjoy 🙂
VIDEO
Most used tools
Scalpel&Allenkeys&RASPs
Scalpel for removing print support. Keys for screws. Every kind of Rasps to get the surface smooth and even.
Super glue
Both Gel and Liquid ones. Use GEL when putting parts together. When it holds use LIQUID on the surface.
Glue Gun
It’s adhesive sets very quickly. We used it only inside the body kit, because on the surface leaves nasty traces.
Leave a Reply
You must be logged in to post a comment.