the Porsche 911 GT2 (997)

How to build a custom RC Porsche 911 GT2 (997)?

This is how we did it.

A German legend again! Everybody is familiar with the basic curves of the classic 911 shape. This time it’s painted as a Highway Patrol speed enforcement.

As always we let you be the judge to tell how well we could capture it.
Our aim was to get it as much authentic as possible.

Building Video

STL files archived with WinRAR

Chassis v.6.0

We’ve changed the slidable concept for a fixed one, because we realized those kind of U profiles are hard to get.

Parts list

Screws and nuts:
M4x40                   1 piece          + M4 nut
M4x25                   2 piece

M3 ball joint         8 pieces
M3x30                   2 pieces        + 2x M3 nuts
M3x50                   2 pieces        + 2x M3 nuts
M3x25                   2 pieces        + 2x M3 nuts
M3x40                   2 pieces        + 2x M3 nuts
M3x10                   2 pieces
M3x20                   2 pieces
M2x12                   39 pieces
M2x16                   8 pieces
M2x20                   11 pieces
M2x8                     4 pieces

STL files archived with WinRAR

The whole design is made for scale 1:10
This is our third model’s self-developed Chassis.
It’s quite, sturdy now as it can be jumped with

Threaded rods:
M4    2 pieces    47mm long
M3    2 pieces    15mm long
M3    2 pieces    11mm long

D8x4     2 pieces
D2x38   4 pieces

4x10x4       4 pieces
5x11x5       6 pieces
10x15x4     2 pieces

3D printing settings we used

3D Printer: Zortrax M200 plus
Technology: LPD
Used material: ABS filamen
Slicer program: Zortrax Z-SUITE

Infill: 20%
Recomended layer height: 0.19 mm
Support was set automatically by the program

Got a question about building Know-How?
Ask us on Facebook!

Don’t Miss the Next Project SUBSCRIBE on YouTube.


RC car gearbox

Parts and general INFO

rc car suspension Porsche 911 GT2


hole to hole distance: 55 mm

Rocking arm screw

2mm nail 35-40mm long. Threaded (DIY), used as a screw. Note: Spring washer used!

RC car wheels


Fastrax scale 1:10 Tyre diameter is: 65 mm Product number: FAST0078GM

Ball cups for steering

4mm ball  with 3mm screw thread.

model factory


 Feetech FS5103B

Wheel adapter

Tamiya: 53056 
rc cars mfactory33

Rear Drive Shaft

Tamiya: 51216 TA05 
A front drive shaft must be shortened

Flange lock nut

Tamiya: 53024


HSP 94103

Bewel gear inlet

this is the inlet gear to the differential

Flange lock nut

Tamiya: 53024

TG10 Wheel Axle 2 pcs

Tamiya: 50823

4x10x4 bearing 

Front wheel bearing

5x11x5 bearing 

Bearing for gearbox

10x15x4 bearing

2 pcs for the differential

Motor 540

  7.2 – 12 V , 20.000 rpm

siren for RC cars

Police lights

Product name: AX-501MC
Multi-function Ultra Bright LED Lamp      Get in on ebay

Filling unwanted cracks

Tamiya: 87053                            Get it on ebay

Here’s a full assembly video of the actual chassis. Enjoy 🙂

Most used tools


Scalpel for removing print support. Keys for screws. Every kind of Rasps to get the surface smooth and even.

Most Used Parts for Assembly

Super glue

Both Gel and Liquid ones. Use GEL when putting parts together. When it holds use LIQUID on the surface.

Super glue for assembly

Glue Gun

It’s adhesive sets very quickly. We used it only inside the body kit, because on the surface leaves nasty traces.
Scroll to Top