Building
the Lamborghini Aventador LP-700
How to build a custom RC Lamborghini Aventador LP-700-4?
This is how we did it.
AVENTADOR!!! Which car fan would not be familiar with this Italian Super Sport Car. We choose this vibrant yellow to embody the companies main colors.
Our aim was to get as much authenticity as possible.
As always we let you be the judge to tell how well we could create him.
Building Video Enjoy!
Chassis v.7.0
We strive for the best Chassis, because I am a perfectionist. My bro isn’t, so there’s the tension growing 😀
Parts list
Screws and nuts:
M4x40 1 piece + M4 nut
M4x25 2 piece
M3 ball joint 8 pieces
M3x30 2 pieces + 2x M3 nuts
M3x50 2 pieces + 2x M3 nuts
M3x25 2 pieces + 2x M3 nuts
M3x40 2 pieces + 2x M3 nuts
M3x10 2 pieces
M3x20 2 pieces
M2x12 39 pieces
M2x16 8 pieces
M2x20 11 pieces
M2x8 4 pieces
STL files archived with WinRAR
The whole design is made for scale 1:10
This is our third model’s self-developed Chassis.
It’s quite, sturdy now as it can be jumped with
Threaded rods:
M4 2 pieces 47mm long
M3 2 pieces 15mm long
M3 2 pieces 11mm long
Magnets:
D8x4 2 pieces
Nails:
D2x38 4 pieces
Bearings:
4x10x4 4 pieces
5x11x5 6 pieces
10x15x4 2 pieces
3D printing settings we used
3D Printer: Zortrax M200 plus
Technology: LPD
Used material: ABS filamen
Slicer program: Zortrax Z-SUITE
Settings:
Infill: 20%
Recomended layer height: 0.19 mm
Support was set automatically by the program
Gearbox
Parts and general INFO
Rocking arm screw
2mm nail 35-40mm long. Threaded (DIY), used as a screw. Note: Spring washer used!
Most used tools
Scalpel&Allenkeys&RASPs
Scalpel for removing print support. Keys for screws. Every kind of Rasps to get the surface smooth and even.
Super glue
Both Gel and Liquid ones. Use GEL when putting parts together. When it holds use LIQUID on the surface.
Glue Gun
It’s adhesive sets very quickly. We used it only inside the body kit, because on the surface leaves nasty traces.
