3Dprinted RC BMW GTR M3 (e46) - Body Kit with Custom Chassis

Chassis v.2.3 (3Dprinted RC BMW M3 GTR)

Load 3D Model

Our 3rd GENERATION CHASSIS for 3Dprinted RC BMW M3 GTR Body Kit

Dimensions of Chassis v.2.3 DESTINY

Wheelbase	270mm
Front Wheel Track	183mm
Rear Wheel Track	183mm

Download DESTINY

to COMPLETE Chassis Assembly

Body Kit of RC BMW M3 GTR e46 — **Body Kit**

+

custom rc car Chassis DESTINY — **Assembly** of Chassis

We have previously made the BMW M3 GTR body kit with an outdated Chassis. Now, you are able to build it with our latest! When you download DESTINY you get everything to build any 3Dprinted 1/10 Chassis for on-road electric RC cars.

Full assembly video of 3Dprinted RC BMW GTR!

Below you can see the “Varying” parts which are needed to set DESTINY for the RC BMW e46 M3 GTR body kit. You will find them among the downloaded folders.

3D printed BMW M3 GTR exact DESTINY parts

Below you can see which Destiny Parts to use to get the exact chassis dimensions of this car!

Discover our developments regarding DESTINY, below there are only its basic parts! Many parts have different types, for example the adjustable connecting part or adjustable fornt and rear turn buckles! Read our post for new/different stuff.

Setting Wheelbase

Connecting Part

WB: 270mm HtH: 45mm

Setting Front Track

Front Rocking Arms

180mm_Rocking_Arm_front (2pcs)

Axle&Wheelnuts

Front_axle_Big_bearing_+3mm (2pcs)

Steering Sides

180_4/4.8/5mm_BALLHEAD_Steering_bar_sides_V3 (2pcs)

Front Turnbuckles

M3 threaded rods (2pcs) Length set by you!

Setting Rear Track

Rear Rocking Arms

180mm_Rocking_Arm_rear (2pcs)

Rear Wheelnuts

Rear_Wheelnut_Big_bearing_+3mm (2pcs)

DogBones

180mm_Dogbone_print (2pcs)

Rear Turnbuckles

M3 threaded rods (2pcs) Length set by you!

At the Front&Rear Turnbuckles you determine the length of the threaded M3 rods. You can easily set the inclination of the wheels!

3D Printing&General details:

Body STL file is fit for scale: 1/10
We always set our car body kits to Tamiya FRONT Tire Diameter: 65mm. This means you can upgrade our 1/10 car models with your previously bought same scale tires and rims!

We recommend to print the light covers
with a liquid based printer (resin printer) for nice opacity. If you print it with a regular printer you will get very cloudy light covers. If you do not have a resin printer and can only print with the regular one, you can try polishing the finished print with aceton. This chemical will start to blend the layers together. Be careful though, do not to inhale it! Do it in a mask!

You can try 3D-print these files
for a different scale, but most probably you will need to modify them! We designed this model to perfecly fit the 1/10 scale only. If we get enough support via purchases/memberships/donation and the engineer brother could finally leave the 9-5 job we would most certainly like to build this charming model in a bigger scale as well!

Chassis PARTS

E-Motor 540

Electric Brushed (7.2 – 12 V, ~25.000 RPM)

GET it on:

RC BMW M3 GTR (e46) with DESTINY Chassis

Chassis v.2.3 (3Dprinted RC BMW M3 GTR)

Dimensions of Chassis v.2.3 DESTINY

+

Full assembly video of 3Dprinted RC BMW GTR!

3D printed BMW M3 GTR exact DESTINY parts

3D Printing&General details:

Chassis PARTS

E-Motor 540

Servo 01

Motor Controller 01

10x15x4 Bearing

Suspension 01

Wheels 01

Magnet 01

Battery 01

Pistol Grip Transmitter 01

OPTIONAL Parts

Metal Differential 01

Bewel Gear Inlet 01

5x11x5 Bearing

Flange Lock Nuts

TG10 Wheel Axle

Metal Clutch 01

Ball Cups for Steering

2 responses to “RC BMW M3 GTR (e46) with DESTINY Chassis”

Leave a Reply Cancel reply