Your cart is currently empty!
Our newest products
-
Product on saleDolphinOriginal price was: $1.00.$0.00Current price is: $0.00.
5 Downloads -
Lion Cub$3.00
0 Downloads -
Foldable Sheet Box$0.00
7 Downloads
3Dprinted RC car BUILD POST (LEGACY Chassis!)
Post date:
How to build a custom 3Dprinted RC Nissan GT-R r35 Liberty Walk Silhouette?
This is how we did it. With our LEGACY Chassis v.5.1
This japanese rocks it ! All car movie fans know its predecessor from F&F movies. This is a modded bodywork of an r35 the Liberty Walk Silhouette
As always we let you be the judge to tell how well we could capture it.
Our aim was to get it as much authenticity as possible.
Download body kit
STL files archived with WinRAR
advertisement
This is a Legacy Chassis! Click to v.5.3
Chassis dimensions
Wheelbase | 249mm |
Front Wheel Track | 175mm |
Rear Wheel Track | 180mm |
We strive for an ultimate universal chassis because we wanna use it under many 3D printed car bodies. So that’s why the slidable parts
The chassis is built on a 2 (aluminium) U profile (8×10 mm) with bought and 3D printed parts.
3D printed parts: Housing of the electric motor, housing of the battery, most of the steering system…
Bought parts are:
The suspension (length 60 mm), the different wheel rims with the tires, the servo, the receiver, drive shaft and the differential is from Tamiya, the electric motor (17000 rpm), and of course screws (M2, M3) and the ball joints (M3).
Screws and nuts:
M4x40 1 piece + M4 nut
M4x~25 2 piece
M2x12 ~50 pieces
M2x16 ~16 pieces
M2x20 ~16 pieces
M2x8 ~ 8 pieces
Nails:
D2x38 4 pieces
Threaded rods:
M4 2 pieces 47mm long
M3 4 pieces ~15mm long
Bearings:
4x10x4 4 pieces
5x11x5 8 pieces
Download CHASSIS
STL files archived with WinRAR
advertisement
The whole design is made for (scale 1:10). This is our fifth model’s self-developed Chassis. It’s quite, sturdy now as it can be jumped with.
3D Printer: Zortrax M200 plus
Technology: LPD
Used material: ABS filamen
Slicer program: Zortrax Z-SUITE
Settings:
Infill: 20%
Recomended layer height: 0.19 mm
Support was set automatically by the program
Got a question about building Know-How?
Ask us at the bottom of this page.
advertisement
Hole to hole distance: 60 mm
Get it on ebay
2mm nail 35-40mm long. Threaded (DIY), used as a screw. Note: Spring washer used!
Fastrax scale 1:10 Tyre diameter is: 65 mm Product number: FAST0078GM
Get it on ebay
4 mm ball with 3mm screw thread.
Tamiya: 50590
Tamiya: 53056
get it on ebay
Feetech FS5103B
get it on ebay
Tamiya: 51216 TA05
A front drive shaft must be shortened
Get it on ebay
Tamiya: 53024
Tamiya: 53218
Tamiya: 50823
Tamiya: 87053
Get it on ebay
Middle and Frontal mount developed by us
Mosquito net used for front Grille raw material from Hardware Store
7.2 – 12 V , 20.000 rpm
Bearing for gearbox
get it on ebay
Front wheel bearing
advertisement
Here’s the full assembly video again, if you did not catch it at the beginning of the post! Enjoy:)
Here’s a full assembly video of an older version, not so many things differ so you’ll get tho see what matters.
Scalpel for removing print support. Keys for screws. Every kind of Rasps to get the surface smooth and even.
Both Gel and Liquid ones. Use GEL when putting parts together. When it holds use LIQUID on the surface.
It’s adhesive sets very quickly. We used it only inside the body kit, because on the surface leaves nasty traces.
advertisement
Leave a Reply
You must be logged in to post a comment.