RC 3D Printing Forum: Cars, Chassis & More

Welcome to the Model FACTORY / mfactory33 – COMMUNITY!Ask us about 3D-printing: Ask here if you have questions about 3D-printingInfill and print issues

You need to log in to create posts and topics.

Infill and print issues

#1 · July 6, 2026, 8:44 pm

What type of infill do you use and how mutch percent, as when printing the first file of main body print failed half way trought please also recoment print settings and supports.

Uploaded files:

#2 · July 7, 2026, 8:39 am

Hello,

We printed it with 20% zigzag infill. I don’t think the infill pattern has a significant impact on the final quality.

The design is support-free, except for the section with the side “window,” where we used an embedded support for the TPU

About the TPU setting in the video from 15:27 https://www.youtube.com/watch?v=Tt4uO9TcY1Q

Best regards,

Balázs

#3 · July 8, 2026, 6:59 pm

It must be my printer then. I still added some supports because my printer is slow, but on the print I showed you, the walls of the print didn’t stick together properly. I’m going to try using higher temperatures. Also, my print head dropped a few millimetres, dented the print, and snapped parts off the bed. Do you have any tips to fix that?

regards ,

mikea